Reasons why Knob and Tube Wiring Toronto has to be replaced

Knob and tube wiring Toronto is very common in old homes. This kind of electrical wiring used to be popular and contrary to the belief of the majority, it is not actually dangerous. In fact, the copper wire used in Knob and tube wire Toronto is larger in diameter than the wires used today for modern wiring which stays cooler as electricity flows through them. However, the disadvantage is the age of the knob and tube wiring that can result into the deterioration of its insulation. This is frequently the reason for overheating and mechanical abuse.

Common problems experienced with Knob and tube wiring Toronto

-        Poor connections – very often, during the duration of the knob and tube wiring, some amateurish connections have been made after the original installation. This has resulted into all the issues you are now experiencing with your Knob and tube wiring Toronto.

-        Damages – its rubber insulation tend to deteriorate after so many years. If it has been subjected to multiple handymen, you can expect signs of wear and tear.

-        Brittleness – rubber insulations can get brittle with age and so with the wires in high heat areas and connections above ceiling light fixtures

Fixing the concerns over the knob and tube wiring Toronto

The above mentioned problems with the Knob and tube wiring Toronto can cause overheating or short circuit which can compromise your safety. Your best option would be to call the professional electrician to determine whether the wiring has to be replaced with modern wiring.  The fact that the wiring has been in service for a long time is enough reason to have it replaced. Another is the absence of ground wire which creates an emergency path for stray electricity that may cause electric shocks.

Sometimes, you have to make wise decisions particularly if your concern is the electrical system. Even if you do not have any issues with Knob and tube wiring Toronto, you can always have it replaced with modern wiring especially if you have high end appliances and electronics that would require more electric power from your system. The old wiring may not be able to accommodate the requirements of your modern life.

Another consideration is your home insurance. Not all insurance companies will accede to providing you with insurance if you have the knob and tube wiring that is considered as an electrical hazard no matter its condition. You will probably be required to replace the Knob and tube wiring Toronto for the sake of getting home insurance.

When is the proper time to replace Knob and tube wiring Toronto?

The best time to have your old wiring replaced is during a home renovation or remodeling. Very often, replacement of knob and tube wiring will require access to walls and it will be more cost effective when the walls, ceilings and floors are open and accessible to the electricians. Aside from the replacement of wirings, the electricians need to add more receptacles, outlets and switches including a control panel and circuit breaker.